2022 FMCSA Audits Year in Review

During 2022 FMCSA audits, there was a 40-percent jump in fines paid. Here are the top violations, and how to avoid them.

Published On: 02/22/2023
Female truck driver with semi truck
J. J. Keller Senior Editor Daren Hansen

Written by:

Daren Hansen

Sr. Transportation Safety Editor — J. J. Keller & Associates, Inc.

With the COVID-19 pandemic waning, on-site DOT audits are roaring back and hitting motor carriers’ bottom lines. Are you prepared?

The Federal Motor Carrier Safety Administration (FMCSA) relied heavily on off-site audits during the height of the pandemic and its need for social distancing. But last year brought a resurgence in traditional on-site investigations, which were up a whopping 54% over the prior year.

The Closer They Look, The More They Find

With more auditors going on-site, it’s no surprise they’re finding more violations — and issuing more fines and penalties. Last year saw a 40-percent jump in fines paid, and a similar rise in audits that uncovered the most serious types of violations.

Only about 5 percent of motor carriers escape an audit without a violation. So are you ready for that knock on the door? If not, it’s time to prepare for a DOT investigation of your compliance program.

And if you think you’re too small to be targeted, think again. Over half of all audits in 2022 (54%) were on companies with fewer than seven power units. About 97 percent of those audited had fewer than 100 units.

A Rebalancing

2020 saw a steep rise in off-site "desk audits" performed at the DOT’s offices. In fact, there were more off-site audits that year than on-site for the first time.

The easing of the pandemic has brought a rebalancing. Though many audits (about 27 percent last year) were conducted off-site, auditors are returning to the field. In 2022, the FMCSA and its state partners performed 12,500 investigations, including roughly:

  • 3,600 on-site comprehensive audits (up 54%)
  • 5,400 on-site focused reviews (up 7%)
  • 3,400 off-site audits (down 31%)

An off-site audit involves a review of documents sent to the auditor. By nature, they’re less intensive than an on-site investigation, where the auditor has more freedom to conduct interviews, inspect vehicles, request documents, and take the audit in new directions.

Over 40 percent of audits were “on-site focused,” where the auditor targets a specific safety problem, such as hours of service (HOS) or driver files.

Penalties are Up

As noted, an increase in on-site audits means more violations are being found, and higher penalties are being paid. Last year saw a 10-percent rise in investigations that led to some type of enforcement.

When fines are levied, they are higher than ever. The maximum fines the FMCSA is allowed to levy are tied to inflation and have increased by 14 percent over the past two years.

2022 By the Numbers

  • 95% of audits resulted in at least one violation
  • 27% resulted in fines or other penalties
  • 3,620 enforcement cases were finalized (up 31%)
  • $25,700,000 in fines were collected (up 40%)
  • $7,100 was paid per settlement, on average (up 7%)
  • 47% of audits resulted in acute or critical violations (up 24%)
    • 30% of audits resulted in critical violations (up 15%)
    • 17% of audits resulted in acute violations (up 39%)
  • 36% of audits resulted in a less-than-satisfactory safety rating
    • 30% were conditional
    • 6% were unsatisfactory

Audits are hitting motor carriers on the bottom line. However, they also have longer-range impacts, given that a less-than-satisfactory safety rating can lead to lost customers, higher insurance rates, and increased liability in court.


  1. $791,640 — CDL and HOS violations
  2. $91,620 — HOS violations
  3. $88,450 — log falsification
  4. $75,080 — drug/alcohol testing, HOS, and vehicle violations
  5. $72,300 — HOS violations

It’s All About Your Records

The state of your documentation will make or break your audit results. If you're unsure where to begin preparing for an audit, getting your DOT-mandated paperwork in good shape is a great place to start. Sixty-four percent of all critical violations found during audits last year related to recordkeeping, including 7 out of the top 10.

Why does it matter?

Consider one of the FMCSA’s favorite targets: false logs. If an auditor finds that just 1 in 10 of your drivers’ logs are falsified, the best you can hope for is a Conditional safety rating. If additional problems are found, you could easily end up having your vehicle operations shut down for good.


  1. Failing to follow local laws and regulations (§392.2)
  2. Falsifying records of duty status
  3. Not using the correct method to record hours
  4. Using a driver before getting pre-employment drug test results
  5. Violating the 14-hour on-duty limit
  6. Violating the 11-hour driving limit
  7. Failing to keep initial MVRs
  8. Failing to inspect vehicles annually
  9. Failing to keep driver qualification files
  10. Driving with a suspended/revoked CDL

*These are the most commonly found “acute” and “critical” regulations, which are the ones used to calculate safety ratings.

Digital is Critical

No matter what type of audit you might face, you may be asked to submit records electronically on short notice. If you can’t, you’ll be at a disadvantage.

For more and more companies and auditors alike, digital records management is no longer a novelty — it’s expected. The more organized and digitized your DOT records are, the easier you can spot problems before an auditor does, and the quicker any audit will conclude.

Where should you focus your efforts? Your driver qualificationdrug/alcohol testing, HOS, and vehicle inspection/maintenance files should top the list — most acute and critical regulations fall into those areas. You may also be asked for proof of insurance, an accident register, and other compliance documents.

Your documentation is often your only proof of compliance. If you fail to create a record or toss one out too soon, you’ll have no way to prove you were doing what’s required. An electronic records management system, like the J. J. Keller® Encompass® Fleet Management System, will alert you to missing or non-compliant records so you can fix the problems before they result in a fine.

Don’t wait for that knock on the door or notice in the mail. Surviving an audit depends on being in compliance, documenting that compliance, and then keeping those documents organized and up to date. Talk with a compliance specialist today about trying the Encompass® System free for 60 days. Call 855-695-5338.

Encompass back office screen transparent background

Change The Way You See Your Fleet

The J. J. Keller Encompass Fleet Management System is the only fleet management platform that provides guidance backed by nearly 70 years of trusted DOT compliance expertise. Add connected technology like ELogs, dash cams, and vehicle tracking devices whenever you're ready.

Sign up for our newsletter!

We'll help you stay on top of regulations, best practices, and fleet industry news. Sign up to receive a monthly email notification with links to our most recent blog articles, free resources, and event invites.